Candle KLVHSKONCT GC32-9172-00 - Manual (Page 31)

KLVHS001–KLVSC009 31
KLVNA112 COMMAND NOT AUTHORIZED: CNTRLPT(cntrlpt) [OPERATOR(operator)]
[COMMAND(command)] [TERM(terminal)] [APPL(appl)]
Explanation: Security validation for the specified user failed when the network
access manager (NAM) was called. The operator operator is not authorized to
issue the specified command. Fields of interest are the control point name name
cntrlpt
, the operator ID operator, the command command, the terminal name
terminal , and the application name name appl. The control point name cntrlpt
may be in the form cntrlpt1-cntrlpt2, where cntrlpt1 refers to the control point
used and cntrlpt2 to the control point requested. The message is logged to create
an audit trail, but this can be overridden at start-up time.
System Action: The command terminates. This message is installation
specific. This message will appear with the use of an external security package.
The operator command entered was not allowed by the external security
package. This message will appear in RKLVLOG and may be seen at the terminal
if the external security package has not passed a message back to NAM. If a
message was passed back by the external security package, that message will be
seen.
User Response: If you are a user viewing this message on your screen, correct
the command or validate the command. If the problem persists, contact your
security administrator for the external security package.
Message Type:
INFO, VIEW.
KLVNA113 PARAMETER REJECTED BY USER EXIT: CNTRLPT(cntrlpt)
[OPERATOR(operator)] [COMMAND(command)] [TERM(terminal)]
[APPL(appl)]
Explanation: A NAM FIELDEXIT has determined that a NAM request field is
not valid. The exit should have provided additional messages about the error.
Fields of interest are the control point name name cntrlpt, the operator ID
operator
, the command command, the terminal name terminal, and the
application name name appl. The control point name cntrlpt may be in the form
cntrlpt1-cntrlpt2, where cntrlpt1 refers to the control point used and cntrlpt2 to the
control point requested. The message is logged to create an audit trail, but this can
be overridden at start-up time.
System Action: The function is not completed. This message is installation
specific, and may be generated for any NAM function. This message will appear
in RKLVLOG.
User Response: Contact your system programmer to determine why the
installation exit has rejected the value.
Message Type:
INFO, VIEW.