Candle KLVHSKONCT GC32-9172-00 - Manual (Page 63)

KLVHS001–KLVSC009 63
KLVOP968 RTM NPM INTERFACE ENABLED - USEREXIT: exit-name
Explanation: An RTM ON command for the NPM response time monitor was
successfully processed. The interface to NPM is now active.
System Action: None.
User Response: None.
Message Type:
INFO.
KLVOP969 UNABLE TO CONNECT TO RTM rtm-name
Explanation: The RTM ON command failed.
System Action: The RTM interface state remains inactive.
User Response: Refer to message KLVRT021. Correct the problem if possible
and reissue the command.
Message Type:
ALERT.
KLVOP970 RTM rtm-name NOT STARTED
Explanation: An RTM OFF command was issued for a response time monitor in
which the interface is not active.
System Action: Command is ignored.
User Response: None.
Message Type:
INFO.
KLVOP971 GTF INTERFACE ENABLED, GTRACEID: id INTERNAL: status
Explanation: A GTF ON command has successfully been completed. id is the
ID written for all GTF records. status can be YES or NO. YES means that internal
trace records will also be written to GTF dataset.
System Action: None.
User Response: None.
Message Type:
INFO.
KLVOP972 GTF INTERFACE DISABLED
Explanation: A GTF OFF command has successfully completed.
System Action: None.
User Response: None.
Message Type:
INFO.
KLVOP973 COMMAND ERROR, GTF INTERFACE MAY BE SET "ON" OR "OFF"
Explanation: A GTF command with an invalid operand has been entered.
System Action: The command is rejected.
User Response: Correct the command and reissue it.
Message Type:
ERROR.
KLVOP974 COMMAND ERROR, GTRACEID: id IS INVALID
Explanation: A GTF command with an invalid GTRACE ID has been entered.
System Action: The command is rejected.
User Response: Make sure that the GTRACE ID is within the range of 1–1023.
Message Type:
ERROR.