Candle KLVHSKONCT GC32-9172-00 - Manual (Page 365)

KMQxx001E–KOCJ0046 365
KN3CV189 GROUP DESCRIPTION ALREADY EXISTS
Explanation: Group description is already assigned to a group being monitored
by ETE.
System Action: None.
User Response: Choose a different group description.
Message Type:
User input error.
KN3CV190 USER REQUESTED TO STOP MONITORING resource_name.
SUBORDINATE RESOURCES MUST BE STOPPED BEFORE THIS
RESOURCE CAN BE STOPPED.
Explanation: A Stop action was issued for a resource that had subordinates that
were being monitored. The high level resource cannot be stopped until the lower
level resources are stopped.
System Action: None.
User Response: List the lower level resources and issue Stop actions for each
one, beginning with the lowest level resource, LUs, and then PUs and lines.
Message Type:
User input error.
KN3CV191 NCP RESOURCE IS NOT BEING MONITORED
Explanation: NCP resource has not been started in the NCP Site Monitor List.
System Action: None.
User Response: Under NCP performance monitor options, start the resource
from the Site Monitor List with the R action code (Start).
Message Type:
User input error.
KN3CV192 NO UPDATE AUTHORIZATION, VIEW ONLY
Explanation: The user has no administrative authority to update the monitoring
options.
System Action: Monitoring options displays are view only.
User Response: If update authorization is required, have a product
administrator authorize the user ID.
Message Type:
Information.
KN3CV193 RECORDING INTERVAL MUST BE GREATER THAN OR EQUAL TO THE
NCP COLLECTION INTERVAL OF nnnnnnnn SECONDS
Explanation: In the Global Monitoring Options panel, a value was specified for
the trend recording interval that was less than the current value of the NCP
collection interval. This is only acceptable if NCP trend recording is turned off.
System Action: None.
User Response: Set the trend recording interval greater than or equal to the
NCP collection interval, or use CICAT reconfiguration to set the NCP collection
interval to a value less than or equal to the trend recording interval, or turn NCP
trend recording off.
Message Type:
User input error.