Candle KLVHSKONCT GC32-9172-00 - Manual (Page 417)

KMQxx001E–KOCJ0046 417
KN3PN024 OMEGAMON II FOR VTAM (V500) INITIALIZATION FAILURE -
RC(return_code) SC(sense_code)
Explanation: OMEGAMON II for VTAM initialization failed. return_code is the
return code from the initialization process; sense_code is the sense code.
System Action: OMEGAMON II for VTAM fails to initialize and shuts down.
User Response: Contact Candle Support Services.
Message Type:
Internal error.
KN3PN025 NCP GLOBAL OPTIONS TABLE CONVERSION COMPLETE
Explanation: During initialization, OMEGAMON II for VTAM converted the
NCP global options table for use with the user-specified NCP topology update
interval feature. This message is issued one time to confirm the conversion.
System Action: None.
User Response: None.
Message Type:
Confirmation.
KN3PN026 THE TREND RECORDING INTERVAL (interval) IS LESS THAN THE NCP
COLLECTION INTERVAL (interval). TREND RECORDING FOR NCP
RESOURCES HAS BEEN DISABLED.
Explanation: The NCP trend recording interval must be greater than or equal to
the NCP collection interval. At OMEGAMON II for VTAM initialization, NCP trend
recording is disabled if the NCP collection interval is greater than the global trend
recording interval.
System Action: NCP trend recording is disabled.
User Response: Use the Global Monitoring Options panel to increase the trend
recording interval to a value greater than or equal to the NCP collection interval
and then re-enable the NCP trend recording option, or use CICAT
reconfiguration to decrease the NCP collection interval to a value less than or
equal to the trend recording interval. Decreasing the NCP collection interval
requires a restart of OMEGAMON II for VTAM.
Message Type:
User specification error.
KN3PN027 OMEGAMON II for VTAM STACK ERROR DETECTED
Explanation: An error was detected either releasing or obtaining stack storage.
System Action: The task abends with a system dump.
User Response: Log the diagnostic information and contact Candle Support
Services
Message Type:
Internal error.
KN3PN028 OMEGAMON II for DB2 FOR VTAM EXTERNAL FUNCTION LEVEL
SECURITY ENABLED
Explanation: OMEGAMON II for VTAM is configured to use an external
security package to control access to certain product functions.
System Action: None.
User Response: None.
Message Type:
Confirmation.