Winco DGC-2020 - Manual (Page 108)

5-10 DGC-2020 BESTlogic+ Programmable 9400200990 Rev B
Figure 5-3. Logic Comment Block
Elements
Protective Elements
27TRIP, 59TRIP, 81 TRIP, 47TRIP (optional), and 51TRIP (optional) are used to connect the TRIP output
to another logic block input.
Control Elements
GENBRK is used to control the generator breaker. Connect the inputs and outputs of the GENBRK logic
block to inputs and outputs of other logic blocks.
Other
MODEM is used to connect the Dialout input to an output of another logic block.
BESTlogic+ FILE MANAGEMENT
To manage BESTlogic+ files, use the Settings Explorer to open the BESTlogic+ Programmable Logic tree
branch. The BESTlogic+ Programmable Logic toolbar is used to manage BESTlogic+ files. Refer to
Figure 5-4. For information on Settings Files management, refer to Section 4, BESTCOMSPlus Software.
Figure 5-4. BESTlogic+ Programmable Logic Toolbar
Saving a BESTlogic+ Programmable Logic File
After programming BESTlogic+ settings, click on the Save button to save the settings to memory.
Before the new BESTlogic+ settings can be uploaded to the DGC-2020, you must select Save from the
File pull-down menu located at the top of the BESTCOMSPlus main shell. This step will save both the
BESTlogic+ settings and the operating settings to a file.
The user also has the option to save the BESTlogic+ settings to a unique file that contains only
BESTlogic+ settings. Click on the Logic Library drop-down button and select Save Logic Library File. Use
normal windows techniques to browse to the folder where you want to save the file and enter a filename
to save as.
Opening a BESTlogic+ File
To open a saved BESTlogic+ file, click on the Logic Library drop-down button on the BESTlogic+
Programmable Logic toolbar and select Open Logic Library File. Use normal windows techniques to
browse to the folder where the file is located.
Uploading a BESTlogic+ File
To upload a BESTlogic+ file to the DGC-2020, you must first open the file through BESTCOMSPlus or
create the file using BESTCOMSPlus. Then pull down the Communication menu and select Upload Logic.
Downloading a BESTlogic+ File
To download a BESTlogic+ file from the DGC-2020, you must pull down the Communication menu and
select Download Logic. If the logic in your BESTCOMSPlus has changed, a dialog box will open asking
you if want to save the current logic changes. You may choose Yes or No. After you have taken the
required action to save or not save the current logic, the downloading is executed.
Printing a BESTlogic+ File
To view a preview of the printout, click on the Print Preview icon located on the BESTlogic+
Programmable Logic toolbar. If you wish to print to a printer, select the printer icon in the upper left corner
of the Print Preview screen.
You may skip the print preview and go directly to print by clicking on the Printer icon on the BESTlogic+
Programmable Logic toolbar. A dialog box, Select Views to Print opens allowing you to check which views