Winco DGC-2020 - Manual (Page 30)

2-8 DGC-2020 Human-Machine Interface 9400200990 Rev B
P0042-27
09-27-06
ALARM CONFIGURATION
PRE-ALARMS
ALARMS
SENDER FAIL
PRE-ALARMS
HIGH COOLANT TEMP
LOW COOLANT TEMP
LOW OIL PRESSURE
LOW FUEL LEVEL
ENGINE OVERLOAD
MAINTENANCE INTERVAL
BATTERY OVERVOLTAGE
LOW BATTERY VOLTAGE
WEAK BATTERY VOLTAGE
HIGH FUEL LEVEL
ENABLE and THRESHOLD settings
for High Coolant Temp, Low Coolant
Temp, Low Oil Pressure, Low Fuel
Level, Engine Overload, Maintenance
Interval, and Battery Overvoltage.
ENABLE, THRESHOLD, and
ACTIVTN DLY settings for Low
Battery Voltage, Weak Battery
Voltage, and High Fuel Level.
ALARMS
HIGH COOLANT TEMP
LOW OIL PRESSURE
LOW FUEL LEVEL
OVERSPEED
ENABLE, THRESHOLD, and
ARMING DELAY settings for High
Coolant Temp and Low Oil Pressure.
ENABLE, THRESHOLD, and
ACTIVATN DELAY settings for Low
Fuel Level and Overspeed.
SENDER FAIL
COOL TEMP SENDR FAIL
OIL PRESS SENDR FAIL
FUEL LEVL SENDR FAIL
VOLTAGE SENSE FAIL
SPEED SENDR FAIL
CONFIG TYPE and ACTIVATN DLY
settings for Cool Temp Sendr Fail, Oil
Press Sendr Fail, Fuel Levl Sendr
Fail, and Voltage Sense Fail.
TIME DELAY setting for Speed Sendr
Fail.
Figure 2-7. Alarm Configuration Screen Branches