Winco DGC-2020 - Manual (Page 14)

1-4 DGC-2020 General Information 9400200990 Rev B
1 Second Rating: 2 Aac
5 Aac Current Sensing
Continuous Rating:
0.1 to 5.0 Aac
1 Second Rating: 10 Aac
Voltage Sensing
Configuration:
Line-to-line or line-to-neutral
Range: 12 to 576 V rms, line-to-line
Frequency: Style selectable, 50/60 Hz or 400 Hz
Frequency Range: 10 to 72 Hz for 50/60 style and 10 to 480 Hz for 400 Hz style
Burden: 1 VA
1 Second Rating: 720 V rms
Generator Sensing Terminals: 41 (A-phase)
39 (B-phase)
37 (C-phase)
35 (Neutral)
Bus Sensing Terminals: 45 (A-phase)
43 (B-phase)
Contact Sensing
Contact sensing inputs include 1 emergency stop input and 16 programmable inputs. The emergency
stop input accepts normally closed, dry contacts. All programmable inputs accept normally open, dry
contacts.
Terminals
Emergency Stop:
46, 47
Programmable
Input 1: 30, 2
Input 2: 29, 2
Input 3: 28, 2
Input 4: 27, 2
Input 5: 26, 2
Input 6: 25, 2
Input 7: 24, 2
Input 8: 23, 2
Input 9: 22, 2
Input 10: 21, 2
Input 11: 20, 2
Input 12: 19, 2
Input 13: 18, 2
Input 14: 17, 2
Input 15: 16, 2
Input 16: 15, 2
Engine System Inputs
∗ Stated accuracies are subject to the accuracy of the senders used.
Fuel Level Sensing
Resistance Range:
33 to 240 Ω nominal
Terminals: 9, 11 (sender common)
Coolant Temperature Sensing
Resistance Range:
62.6 to 637.5 Ω nominal
Terminals: 10, 11 (sender common)
Oil Pressure Sensing
Resistance Range:
34 to 240 Ω nominal
Terminals: 8, 11 (sender common)