J1939 ecu, Ecu data, Engine configuration – Winco DGC-2020 User Manual
Page 92: Figure 4-46. metering, ecu data, Figure 4-47. metering, engine configuration
Advertising
4-42
DGC-2020 BESTCOMSPlus Software
9400200990 Rev B
J1939 ECU
The ECU reports operating information to the DGC-2020 through the CAN interface when the ECU is
configured for Volvo Penta. Operating parameters and diagnostic information, if supported by the ECU,
are decoded and displayed on these screens.
ECU Data
This screen displays ECU Lamp Status and ECU Data. Refer to Figure 4-46
Figure 4-46. Metering, ECU Data
Engine Configuration
This screen displays Engine Configuration. Refer to Figure 4-47.
Figure 4-47. Metering, Engine Configuration
Advertising