Active dtc and previously active dtc, Mtu mdec, Mdec alarms – Winco DGC-2020 User Manual
Page 93: Mdec fault codes, Figure 4-48. metering, download dtc, Figure 4-49. metering, mdec alarms, Figure 4-50. metering, mdec fault codes
9400200990 Rev B
DGC-2020 BESTCOMSPlus Software
4-43
Active DTC and Previously Active DTC
This screen is used for viewing, downloading, and clearing DTC (Diagnostic Trouble Codes). Refer to
Figure 4-48.
Figure 4-48. Metering, Download DTC
MTU MDEC
The MTU MDEC reports operating information to the DGC-2020 through the CAN interface when the
ECU is configured for MTU MDEC. Operating parameters and diagnostic information, if supported by the
MTU MDEC, are decoded and displayed on these screens.
MDEC Alarms
MDEC Pre-Alarms and MDEC Alarms are reported on this screen. Refer to Figure 4-49.
Figure 4-49. Metering, MDEC Alarms
MDEC Fault Codes
MDEC Fault Codes can be viewed and downloaded on this screen. Refer to Figure 4-50.
Figure 4-50. Metering, MDEC Fault Codes