Winco DGC-2020 - Manual (Page 84)

4-34 DGC-2020 BESTCOMSPlus Software 9400200990 Rev B
Figure 4-31. Settings Compare Setup
A dialog box will appear and notify you if any differences were found. The BESTCOMSPlus Settings
Compare dialog box (Figure 4-32) is displayed where you can view all settings (Show All Settings), view
only the differences (Show Settings Differences), view all logic (Show All Logic Paths), or view only logic
differences (Show Logic Path Differences). Select Close when finished.
Figure 4-32. Settings Compare View
Uploading Firmware Files
Embedded firmware is the operating program that controls the actions of the DGC-2020. The DGC-2020
stores firmware in nonvolatile flash memory that can be reprogrammed through the communication ports.
It is not necessary to replace EPROM chips when updating the firmware with a newer version.
Future enhancements to the DGC-2020 functionality may make a firmware update desirable. Because
default settings are loaded when DGC-2020 firmware is updated, your settings should be saved in a file
prior to upgrading firmware.