Winco DGC-2020 - Manual (Page 177)

9400200990 Rev B DGC-2020 Modbus
™ Communication
B-19
Holding
Register
Parameter Range
Read/Write
Supported
Data
Format
Units
40460 Torque At Idle Point3 0 to 125% R 1%/bit gain, -125% offset
40461 Speed At Idle Point4
0 to 8031.875
rpm
R
0.125 rpm/bit, 0 rpm offset
40462 Torque At Idle Point4 0 to 125% R 1%/bit gain, -125% offset
40463 Speed At Idle Point5
0 to 8031.875
rpm
R
0.125 rpm/bit, 0 rpm offset
40464 Torque At Idle Point5 0 to 125% R 1%/bit gain, -125% offset
40465 Speed At High Idle Point6
0 to 8031.875
rpm
R 0.125 rpm/bit, 0 rpm offset
40466 Gain Of End speed governor
0 to 50.2 %/rpm
R
0.0007813 % engine reference
torque/rpm per bit gain (normalized),
0 %/rpm per bit offset
40467 Reference Engine Torque 0 to 64 255 Nm R 1 Nm/bit gain, 0 Nm offset
40468 Override Speed Point7
0 to 8031.875
rpm
R 0.125 rpm/bit, 0 rpm offset
40469 Override Time Limit 0 s to 25 s R 0.1 s/bit gain, 0 s offset
40470 Speed Lower Limit 0 to 2500 rpm R 10 rpm/bit gain, 0 rpm offset
40471 Speed Upper Limit 0 to 2500 rpm R 10 rpm/bit gain, 0 rpm offset
40472 Torque Lower Limit 0 to 125% R 1%/bit gain, -125% offset
40473 Torque Upper Limit 0 to 125% R 1%/bit gain, -125% offset
40474 Crankcase Pressure
-250 to +251.99
kPa
R
0.0078125 kPa/bit gain,
-250 kPa offset
40475 Oil Filter Diff. Pressure 0 to 125 kPa R 0.5 kPa/bit gain, 0 offset
40476 Fuel Filter Diff. Pressure 0 to 500 kPa R 2 kPa/bit gain, 0 offset
40477-82 FUTURE USE
40483 ECU Param. Status Group 1 R
bits 0-2: throttle position
bits 3-5: % load at present rpm
bits 6-8: actual % engine torque
bits 9-11: engine speed
bits 12-14: injection control pressure
Bit 15: NOT USED
3-Bit Status Flag Values:
000 for Valid Data
001 for No Comms
010 for Not Sent
011 for Not Supp
100 for Sender Error
40484 ECU Param. Status Group 2 R
bits 0-2: injector metering rail pressure
bits 3-5: engine run time
bits 6-8: trip fuel
bits 9-11: total fuel used
bits 12-14: coolant temperature
Bit 15: NOT USED
3-Bit Status Flag Values:
000 for Valid Data
001 for No Comms
010 for Not Sent
011 for Not Supp
100 for Sender Error