Winco DGC-2020 - Manual (Page 57)

9400200990 Rev B DGC-2020 BESTCOMSPlus Software 4-7
SETTINGS EXPLORER
The Settings Explorer is a convenient tool within BESTCOMSPlus used to navigate through the various
settings screens of the DGC-2020 plug-in as listed in the following paragraphs.
Logic setup will be necessary after making certain setting changes. For more information, refer to Section
5, BESTlogic+ Programmable Logic.
DGC-2020 AND SYSTEM PARAMETERS
Prior to use, the DGC-2020 must be configured for operation in the intended application. The description
of these configuration settings is organized as follows:
• General
Settings
• Communications
• System
Parameters
• Programmable
Inputs
• Alarm
Configuration
• Generator
Protection
• Breaker
Management
• Programmable
Senders
• BESTlogic+ Programmable Logic
GENERAL SETTINGS
General DGC-2020 settings consist of settings controlling the HMI display and indicators. Additional
general settings include style number configuration, DGC-2020 identification, DGC-2020 version
information, and device security setup.
Front Panel HMI
The contrast
A
of the front panel LCD (liquid crystal display) can be adjusted to suit the viewing angle used
or compensate for environmental conditions.
A power saving feature, referred to as Sleep mode
B
, will turn off the front panel LCD backlight and LCD
heater (if equipped) when the DGC-2020 is in Off mode or Auto mode not running and a key is not
pressed for more than 15 minutes . Normal display operation is resumed when any front panel button is
pressed or the genset is started remotely via the ATS. Sleep mode is enabled and disabled in
BESTCOMSPlus.
Specific language modules can be uploaded into the DGC-2020. When the language module upload is
complete, use the Language
C
selector to select the correct language.
BESTCOMSPlus front panel HMI settings are illustrated in Figure 4-8.
NOTE
In the following descriptions, superscript letters (e.g., setting
X
) mark words and
phrases relating to DGC-2020 settings. Each letter references settings illustrated
in BESTCOMSPlus. Lettered notes at the end of each group of descriptions
provide the range and increment for each setting.