Winco DGC-2020 - Manual (Page 53)

9400200990 Rev B DGC-2020 BESTCOMSPlus Software 4-3
Figure 4-3. BESTCOMSPlus Splash Screen
The BESTCOMSPlus platform window opens. If a DGC-2020 is connected, select New Connection from
the Communication pull-down menu and select DGC-2020. See Figure 4-4. The DGC-2020 plug-in is
automatically activated after connecting to a DGC-2020.
Figure 4-4. BESTCOMSPlus Select New Device Screen
If a DGC-2020 is not connected, select New from the File pull-down and select DGC-2020.
Activating the DGC-2020 Plug-In
The DGC-2020 plug-in must be activated before it can be used to set up a DGC-2020 product. If the
DGC-2020 plug-in has already been activated, skip to Communication.
Requesting an Activation Key
When initially running the DGC-2020 plug-in, the Activate Device pop-up will appear. You must contact
Basler Electric for an activation key before you can activate the DGC-2020 plug-in. You may request an
activation key through email or the Basler Electric website. Click on either the Website or Email button.
Click on the Activate button when you are ready to enter the activation key you received from Basler
Electric. The Device Needs Activated pop-up will appear. Refer to Figure 4-5.