Echelon IzoT Commissioning Tool - Manual (Page 154)

Data Layer
Shows/hides all monitored connections.
• Right-click an empty space in your OpenLNS CT drawing, point to Display Options on the
shortcut menu, and select View Subsystems Layers from the shortcut menu. The View
Subsystem Layers dialog box opens. Select or clear the IzoT Commissioning Tool Layers you
want displayed or hidden. You can click Apply if you want to see how your OpenLNS CT
drawing opens with the current settings. When you are done, click OK.
Working with IzoT Commissioning Tool SmartShapes
You can view, edit, move, copy, and delete IzoT Commissioning Tool SmartShapes. An IzoT
Commissioning Tool SmartShape is a SmartShape within an OpenLNS CT drawing that represents a
physical component in a L
ON W ORKS network such as device, channel, network variable, or
connection. This section describes how to work with IzoT Commissioning Tool SmartShapes.
Viewing and Setting IzoT Commissioning Tool SmartShape
Properties
You can view and set the properties of an IzoT Commissioning Tool SmartShape. If you modify the
properties with IzoT Commissioning Tool attached to the network and OnNet, the changes will be sent
to the physical devices immediately. Otherwise, the changes will be stored in the OpenLNS database
and then propagated to the physical devices when IzoT Commissioning Tool is attached and placed
OnNet.
To view the properties of an IzoT Commissioning Tool SmartShape, right-click the SmartShape and
select Properties from the shortcut menu. A Properties dialog box opens. For a description of the
properties that you can view and modify, click Help in the dialog box.
Moving an IzoT Commissioning Tool SmartShape
You can move an IzoT Commissioning Tool SmartShape within an OpenLNS CT drawing. You can
reposition it within the current subsystem; move it into a different subsystem; or change the channel in
on which it is located, which can be in the same or in a different subsystem. You cannot move an IzoT
Commissioning Tool SmartShape using Visio’s cut and paste commands.
Repositioning an IzoT Commissioning Tool SmartShape
You can re-position any IzoT Commissioning Tool SmartShape within a subsystem by dragging it to a
different location on the same drawing page.
Changing the Subsystem for an IzoT Commissioning Tool SmartShape
You can move a device, router, functional block, and subsystem SmartShape into another subsystem.
To do this, follow these steps:
138 Designing Networks