Echelon IzoT Commissioning Tool - Manual (Page 86)

3. Set the user interface, access, and privileges of the new user.
UI Setting If you are using Visio 2003, you can select the set of IzoT
Commissioning Tool and Visio menus that will be available to the
user. This option is not available if you are using Visio 2010. If you
are using Visio 2003, you have two choices:
• Maximum. This setting provides the user a full set of toolbars,
menus, and menu items for advanced use of IzoT
Commissioning Tool.
• Minimum. This setting provides the user only the basic menus,
menu items, and toolbars necessary to use IzoT Commissioning
Tool.
Access Control Select the type of access the user has in the OpenLNS CT drawing.
You have two choices:
• All Subsystems. The user has unrestricted access to all of the
subsystems in the network.
• Selection. The user’s access is restricted to the selected
subsystem. This option can only be applied to the root
subsystem or any one of the subsystems one level below it. If
you select the root subsystem, the user cannot access any of the
subsystems below it.
70 Getting Started