Echelon IzoT Commissioning Tool - Manual (Page 194)

All the fields for the selected object are listed in structural order in the Field List box. To set the value
for a field, expand that field and then click twice slowly on the value that opens below it. Enter a valid
value for the field (the minimum and maximum values appear in the Field Info box to the right). Click
OK to apply the changes.
If a network variable or configuration property has an enumerated type such as SNVT_hvac_mode or
SCPTnwrkCnfg, a list of all the possible enumerations for the selected object opens the bottom of the
dialog. Select the desired enumeration from the list and then click OK. Alternatively, you can click
twice slowly on the value that opens below the object in the Field List box and enter a valid
enumeration for the object.
178 Monitoring and Controlling Networks