Echelon IzoT Commissioning Tool - Manual (Page 60)

operational network.
See Recovering an IzoT Commissioning Tool Network in Chapter 7,
Maintaining Networks, for more information.
Network Database
Path Specifies the folder that will contain the network database. By
default, the database path is
C:\Users\Public\Documents\LonWorks\OpenLnsCt\Databases\
<network name>.
You can specify a different to place the IzoT Commissioning Tool
network database; however, the network name in the database path
must match the one in the Network Name box.
Network Drawing
Path Specifies the folder that will contain the OpenLNS CT drawing. By
default, the drawing path is
C:\Users\Public\Documents\LonWorks\OpenLnsCt\
Drawings\<network name>.
You can specify a different to place the OpenLNS CT drawing;
however, the network name in the drawing path must match the one
in the Network Name box.
Network Description Contains an optional description of the network being created. This
field has no effect on network operation, but it can provide
additional documentation for as-built reports.
6. Click Next. The Network Interface dialog opens.
7. If your IzoT Commissioning Tool computer is attached to the physical network and you want IzoT
Commissioning Tool to communicate with the physical devices, select Network Attached. If you
select this option and you have more than one network interfaces in your computer, select the
name of the OpenLDV 4.0 or IP-852 network interface under Network Interface Name.
44 Getting Started