Echelon IzoT Commissioning Tool - Manual (Page 179)

This dialog box allows you to manually or automatically match the discovered devices on the
network with the defined device SmartShapes in the OpenLNS CT drawing. To select a device
from any of the lists, click the entry in the leftmost column (the # column in the Discovered
Devices list, and the Subsystem column in the Defined Devices and Devices to be
Commissioned lists). After selecting a device, its field in the leftmost column will be shaded
blue. Once you click a device in the other list, the field will be shaded gray. When the devices in
each column are compatible, the match command will become available.
If you selected the Include Devices with Unknown Programs option and such devices are
discovered, they will be listed under Discovered devices. However, the Template field will be
empty if the device is applicationless, or it will display the device’s program ID in hex format if
there is no corresponding device template.
9. Use the following commands to match device SmartShapes in your OpenLNS CT drawing to
physical devices on the network:
Discovered and
Defined Device Lists
Discover Searches for devices. If one or more physical devices were not
discovered, you can force their discovery by pressing their service
pins and then pressing the Discover button. Devices that were
removed from the Discovered Devices list using the Exclude
button are not rediscovered.
Wink Winks the selected device(s) in the Discovered Devices list. The
action performed by the device is application dependent. For
example, some devices may blink their power LED when winked.
This command is only available if one or more devices are selected
in the Discovered Devices list.
Exclude Removes the selected device(s) from the Discovered Devices or
Defined Devices list. Once a device has been excluded, it can only
be re-listed by restarting the device discovery process.
This command is only available if a device is selected in the
IzoT Commissioning Tool User’s Guide 163