Echelon IzoT Commissioning Tool - Manual (Page 216)

name without a path only if the XIF file is in the folder specified in the XIF Search Path box
Network Properties: Device options category (to access this property, click Add-ins, click
IzoT Commissioning Tool, click IzoT Commissioning Tool Options, and then select
Device from the Options Category list). The device template name in the Template Name
box is automatically set to the name of the XIF file (without the extension), but you can
change it to any name that is unique to the network.
• Existing Template. Uses an existing device template. This is the default. By default, the
current device template is displayed in the Existing Template Name list. You can select any
device template currently defined in the network from this list.
If you select Upload From Device or Load XIF, the change is applied to all the devices
listed in the Device Names box. IzoT Commissioning Tool then maps all the functional
blocks, network variables, message tags, and connections from the old device template to the
new one, attempting to preserve as much of the original device configuration as possible. If
objects cannot be mapped into the new device template, the IzoT Commissioning Tool
informs you which objects will be lost and lets you cancel the operation.
2. Click Next. The Device Application Image page opens, unless you are loading new application
files into multiple devices with different device templates. In this case, this page is repeated for
each unique device template used by the selected devices. Once you have defined the device
template for all the selected devices, the wizard will then proceed to the Device Application Image
page.
Selecting an Application Image and a Neuron Firmware Image
In the Device Application Image page, you select an application image to load into the device.
1. Select the device application you want to load into the device by setting the following options:
200 Maintaining Networks