Echelon IzoT Commissioning Tool - Manual (Page 347)

variable SmartShapes to which they are connected.
The default reference SmartShape spacing value is 1.1.
Scope: Current network, current IzoT Commissioning Tool
computer
General Options
The General category contains the following options.
Confirm Deletes Prompts you to confirm the deleting of an IzoT Commissioning Tool
SmartShape. This option is selected by default.
Scope: Current network, current IzoT Commissioning Tool
computer
Force Wizard
Prompts Displays all wizards when you create a new IzoT Commissioning
Tool SmartShape, regardless of the settings of any other options.
This option is cleared by default.
If this check box is selected, and you create a functional block with
automatic device selection enabled, for example, the Functional
Block Wizard will still open.
If this check box is cleared and a functional block and its associated
device are copied, for example, the new functional block will
automatically be associated with the new device and the Functional
Block Wizard will not open.
Scope: Current network, current IzoT Commissioning Tool
computer
Enable Tracing Enables IzoT Commissioning Tool tracing. This option is cleared by
default.
IzoT Commissioning Tool User’s Guide 331