Echelon IzoT Commissioning Tool - Manual (Page 330)

ObjStateStyle Specifies whether the coloring style is applied to the
SmartShape’s fill, line, text, or a combination of the three.
• A value of 1 indicates that the style applies to the
SmartShape’s lines.
• A value of 2 indicates that the value applies to the
SmartShape’s fill.
• A value of 4 indicates that the style applies to the
SmartShape’s text.
You can add values together to specify combinations. For
example, a value of 6 indicates that the style applies to the
SmartShape’s fill and text, but not its lines. By default, the style
applies to all three SmartShape attributes.
PingClass Specifies the ping interval.
• A value of 0 specifies that the default ping interval is used for
this SmartShape.
• A value of 1 specifies that the 1-minute ping interval be used.
• A value of 2 specifies that the 2-minute ping interval be used.
• A value of 3 specifies that the 15-minute ping interval be
used.
A value of 4 specifies that the Never ping interval be used.
Priority A value of 1 indicates that priority will be enabled for devices
created from this master SmartShape.
ProgramId Device program ID. IzoT Commissioning Tool uses this value
first to find the device template by name. If not specified, the
TmplName value is used.
RequiresVFB
Specifies whether the device requires a virtual functional block.
• A value of 0 specifies that the device does not require a
virtual functional block.
• A value of 1 specifies that the device requires virtual
functional blocks.
• A value of -1 specifies that IzoT Commissioning Tool should
determine this value based on the device’s set of network
variables, configuration properties, and message tags.
The default value is -1.
TmplName Device template name. This must be specified if XifName is
specified. Be sure to specify a unique device template name for
each unique device interface (XIF) file.
• If IzoT Commissioning Tool does not first find a device
template based on the ProgramId value, it uses the value in
TmplName to look up the device template by name. If
neither is found, IzoT Commissioning Tool searches for a
device interface file based on the XifName value and the XIF
search path. If found, the XIF file is loaded and used. If it is
not found, the IzoT Commissioning Tool user is prompted to
enter a device interface file when the device master
SmartShape is dragged to the OpenLNS CT drawing.
XifName File name or full path of the device interface (XIF) file. If it is
314 Creating and Using Custom IzoT Commissioning Tool Shapes and Stencils