Echelon IzoT Commissioning Tool - Manual (Page 157)

• Select Online to put the devices or routers in the online state.
This is the default for routers. The behavior in the online state
depends on the device. A Neuron-hosted device, for example,
will run its application after it has been moved.
• Select Offline to put the devices or routers in the offline state.
This is the default for devices. The behavior in the offline state
depends on the device. A Neuron-hosted device, for example,
will not run its application after it has been moved. Devices in
the offline state still respond to Online, Wink, and Test
commands. The devices also receive network variable updates;
however, their applications will not process these values, and
the devices will not send network variable updates.
• Select Restore to return the devices or routers to their states
before they were moved.
3. Click OK. If IzoT Commissioning Tool is OnNet and any of the devices or routers have been
commissioned, the Move Devices and Routers dialog box opens.
4. Physically move the device or router onto the channel you selected.
5. Click OK. IzoT Commissioning Tool completes the channel change.
6. If the channel change fails, a Re-commission Prompt will open in which you can recommission
the devices that you tried to move. Click Yes to recommission the devices. Re-commissioned
routers will be put in the online state; devices will be placed offline. Click No
to leave the devices
deconfigured.
Moving an OpenLNS Computer to a Different Channel
You can move an OpenLNS computer (IzoT Commissioning Tool computer, OpenLNS Server, or
other OpenLNS client) to a different channel following these steps:
1. Right-click the OpenLNS Network Interface SmartShape for the IzoT Commissioning Tool
computer, or the NSD SmartShape for another OpenLNS computer, and then click Change
Channel from the shortcut menu.
IzoT Commissioning Tool User’s Guide 141