Echelon IzoT Commissioning Tool - Manual (Page 63)

You can disable a plug-in to prevent IzoT Commissioning Tool from
prompting you to register the plug-in.
This button is available when a plug-in listed under Already
Registered or Not Registered or either of the category labels is
selected. If the Already Registered or Not Registered category label
is selected, all the plug-ins under the selected category label will be
disabled.
Remove Removes a plug-in from the Pending list. This button is available
when a plug-in listed under Pending or the Pending category label is
selected. If the Pending category label is selected, all the plug-ins
under it will be removed.
Skip this Prompt when
Re-opening Drawing Select this check box if you want the Network Wizard to skip the
Plug-In Registration page each time you open the IzoT
Commissioning Tool network. If the Show all Options check box
under Existing Networks in the IzoT Commissioning Tool Design
Manager General tab is selected, the prompt will appear regardless if
this option is selected.
Register all New
Plug-ins when
Re-opening this
Drawing Select this check box if you want new plug-ins in the plug-in
directory to be automatically registered each time you open the
OpenLNS CT drawing.
New plug-ins must be registered with Windows. The installation
program for the plug-ins typically does this automatically. If you are
designing your own plug-ins see the OpenLNS Plug-in Framework
User’s Guide for more information on how to create plug-ins and
register them with Windows.
Continue with
Advanced Options Opens and lets you set options in the authentication, domain
definition, timing, and resource file language pages in the Network
Wizard. See Recovering an IzoT Commissioning Tool Network in
Chapter 7, Maintaining Networks, for setting the options in these
pages.
12. Click Finish to open your new OpenLNS CT drawing.
13. If you are creating or opening an IzoT Commissioning Tool network for the first time, a message
opens informing you that the drawing being opened contains macros from the Echelon
Corporation, and asking you if you would like to enable macros for this drawing. Verify that the
macros were signed by Echelon Corporation, and then enable macros, which is required for using
IzoT Commissioning Tool. Set Always Trust Macros from this Source to automatically enable
macros for all OpenLNS CT drawings that are signed by Echelon
Creating an IzoT Commissioning Tool Network from an Existing
OpenLNS Database
You can create a new IzoT Commissioning Tool network design by opening an OpenLNS network
database that is not already associated with a drawing. IzoT Commissioning Tool will then create a
drawing for the database. You can use this procedure to import an existing network into IzoT
Commissioning Tool when the network was created with an OpenLNS application other than IzoT
Commissioning Tool. To create a new IzoT Commissioning Tool network from an existing OpenLNS
network database, you must use IzoT Commissioning Tool on a local client.
To create a new IzoT Commissioning Tool network design from an existing OpenLNS database,
follow these steps:
IzoT Commissioning Tool User’s Guide 47