Echelon IzoT Commissioning Tool - Manual (Page 155)

1. Right-click the SmartShape. You can select multiple SmartShapes by holding down CTRL and
clicking the SmartShapes, or clicking an empty space in the drawing page and dragging a selection
net around the SmartShapes.
2. Point to Move Device (for device, router, and subsystem SmartShapes) or Move FB (for
functional block SmartShapes) on the shortcut menu.
3. Click Change Subsystem (for device, router, and functional block SmartShapes) or Move (for
subsystem SmartShapes). The Select a Subsystem dialog box opens. This dialog lists any
subsystems nested within the current subsystem.
4. Click the Up button ( ) to move up one level in the network hierarchy; double-click a subsystem
to move down one level. Select the new subsystem.
5. Click OK.
6. If you move a functional block with any connector SmartShapes, you will be prompted to have
IzoT Commissioning Tool convert the connector SmartShapes to reference connection
SmartShapes. Click OK.
Changing the Channel for an IzoT Commissioning Tool SmartShape
You can move a device, router, or OpenLNS computer onto a different channel. OpenLNS computers
include IzoT Commissioning Tool computers, the OpenLNS Server, and other OpenLNS clients.
Moving a Device or Router to a Different Channel
To change the channel on which devices and routers are located, follow these steps:
1. Right-click the device or router SmartShape, or a subsystem containing the device or router, point
to Move Device, and then click Change Channel on the shortcut menu.
You can move multiple device and router SmartShapes attached to the same channel by holding
down CTRL and clicking the SmartShapes, or clicking an empty space in the drawing page and
dragging a selection net around the SmartShapes. The Channel Select dialog box opens.
IzoT Commissioning Tool User’s Guide 139