Echelon IzoT Commissioning Tool - Manual (Page 363)

LonMaker Release 3, or if you are switching between a fast
OpenLNS network interface (layer 2) and an OpenLNS network
interface (layer 5). If you attempt to do either of these, IzoT
Commissioning Tool will ask whether to upgrade the NSD. For
best performance, perform the upgrade. If you are only
temporarily using a different network interface, you may choose
not to upgrade. In this case, communication with physical devices
is limited until you reopen the network with the original network
interface. If initially you choose not to upgrade the NSD and
decide later to upgrade, right-click the NSD SmartShape, and then
click Upgrade NSD on the shortcut menu.
When moving from an OpenLNS fast (layer 2) network interface
to an OpenLNS (layer 5) network interface, all connections and
monitor sets may not be created on the new network interface. If
this happens, a dialog displays the items that will be lost and gives
you an opportunity to cancel the upgrade.
Scope: Current network, current IzoT Commissioning Tool
computer
Enable Warning When
IzoT Commissioning
Tool Language Setting
does not Match Visio Displays a message when the language set in IzoT Commissioning
Tool and the currently installed language in Visio do not match.
Scope: All networks, current IzoT Commissioning Tool computer
Enable Warning When
IzoT Commissioning
Tool Language Setting
does not Match
Network Displays a message when the languages set in IzoT
Commissioning Tool and the OpenLNS CT drawing do not match.
This can occur if the installed languages are different between
IzoT Commissioning Tool that created the OpenLNS CT drawing
and the one opening it.
Scope: Current network, current IzoT Commissioning Tool
computer
Enable Visio Version
Warning Displays a message if the version of Visio installed on your
computer is incompatible with your version of IzoT
Commissioning Tool.
This applies only to versions of Visio newer than Visio 2010 or
Visio 2003. If an older version of Visio is installed on your
computer and you do not also have Visio 2010 or Visio 2003
installed, IzoT Commissioning Tool will not run on your
computer.
Scope: All networks, current IzoT Commissioning Tool computer
IzoT Commissioning Tool User’s Guide 347