10 remote device, 11 network, 12 hdd manager – AGI Security SYS-16HN44P User Manual

Page 124: 13 usb manager, 4 smart add, Remote device, Network, Hdd manager, Usb manager, Smart add

Advertising
background image

112

4.3.10 Remote Device

Click

, system goes to the remote device interface. Please refer to chapter 4.4

4.3.11 Network

Click

, system goes to the network interface. It is to set network IP address, default gateway and etc.

Please refer to chapter 4.12.

4.3.12 HDD Manager

Click

, system goes to the HDD manager interface. It is to view and manage HDD information.

Please refer to chapter 4.13.1.

4.3.13 USB Manager

Click

, system goes to the USB Manager interface. It is to view USB information, backup and update.

Please refer to chapter 4.10.1 file backup, chapter 4.10.3 backup log, chapter4.10.2 import/export, and

chapter 4.15.5 upgrade for detailed information.

4.4 Smart Add

When the network camera(s) and the NVR are in the same router or switch, you can use smart add

function to add all network cameras to the NVR at the same time.

There are two ways for you to go to the smart add interface.
 From the startup wizard, click Smart add button. See Figure 4-12.

Figure 4-12

 On the preview interface, right click mouse and then select Smart add. See Figure 4-13.

Advertising
This manual is related to the following products: