AGI Security SYS-16HN44P - Manual (Page 258)

246
Figure 5-29
Please refer to the following sheet for detailed information.
Parameter Function
Max connection It is the max Web connection for the same device. The value
ranges from 1 to 120. The default setup is 120.
TCP port The default value is 37777. You can input the actual port
number if necessary.
UDP port The default value is 37778. You can input the actual port
number if necessary.
HTTP port The default value is 80. You can input the actual port number if
necessary.
HTTPS The default value is 443. You can input the actual port number if
necessary.
RTSP port The default value is 554.
5.8.2.4 WIFI AP
Please note this function is for some series only.
The WIFI AP interface is shown as in Figure 5-30. Here you can set WIFI hotspot, so that the network
camera can use the hotspot to connect to the network.