AGI Security SYS-16HN44P - Manual (Page 192)

180
Figure 4-102
4.12.1.4 WIFI
The WIFI interface is shown as below. See Figure 4-103.
 Enable: Check the box here to enable WIFI function.
 Refresh: You can click it to search the hotspot list again. It can automatically add the information
such as the password if you have set it before.
 Disconnect: Here you can click it to turn off the connection.
 Connect: Here you can click it to connect to the hotspot. System needs to turn off current connection
and then connect to a new hotspot if there is connection of you selected one.