AGI Security SYS-16HN44P - Manual (Page 294)

282
5.8.5.2.1 User name
In this interface you can add/remove user and modify user name. See Figure 5-89.
Figure 5-89
Add user: It is to add a name to group and set the user rights. See Figure 5-90.
There are four default users: admin/888888/666666 and hidden user “default”. Except user 6666, other
users have administrator right. The user 666666 can only have the monitor rights,.
Hidden user “default” is for system interior use only and can not be deleted. When there is no login user,
hidden user “default” automatically login. You can set some rights such as monitor for this user so that
you can view some channel view without login.
Here you can input the user name and password and then select one group for current user.
Please note the user rights shall not exceed the group right setup.
For convenient setup, please make sure the general user has the lower rights setup than the admin.
Figure 5-90