AGI Security SYS-16HN44P - Manual (Page 293)

281
Time
Format
There are two options: 24-H and 12-H.
Time zone
The time zone of the device.
System
time
It is to set system time. It becomes valid after you set.
Sync PC You can click this button to save the system time as your PC current
time.
DST Here you can set day night save time begin time and end time. You
can set according to the date format or according to the week format.
NTP You can check the box to enable NTP function.
NTP server You can set the time server address.
Port
It is to set the time server port.
Interval
It is to set the sync periods between the device and the time server.
5.8.5.1.3 Holiday Setup
Holiday setup interface is shown as in Figure 5-88.
Here you can click Add holidays box to add a new holiday and then click Save button to save.
Figure 5-88
5.8.5.2 Account
Note:
 For the character in the following user name or the user group name, system max supports 6-digits.
The space in the front or at the end of the string is null. The valid string includes: character, number,
and underline.
 The user amount default setup is 64 and the group amount default setup is 20. The factory default
setup includes two levels: user and admin. You can set the corresponding group and then set the
rights for the respective user in the specified groups.
 User management adopts group/user modes. The user name and the group name shall be unique.
One user shall be included in only one group.