Auto-Zone Control Systems Auto-Zone Plus Systems Installation & Operation (Version 03A) - Manual (Page 138)

Section 3 Auto-Zone Plus
3-52 Programming
CV AHU Scheduling and
Holidays
The Zone Manager and the Constant Volume AHU controllers both use the exact same
screens for programming. They also use the same method for calculating
Occupied/Unoccupied periods. All schedules are entered in 24-Hour Military Format.
See the Zone Manager or Constant Volume Menu Operations Screen for information on
how to access these programming functions.
Scheduling/Holiday Menu
Week Schedules
Schedule Start Time and Stop Times
Note: The second line displays which day of the week is currently being
programmed. This automatically increments as you finish the Stop Time and
continue to the next Start Time screen.
Zone Manager
1) Week Schedules
2) Holidays
ESC) Previous Menu
This menu appears whenever the user accesses the Scheduling
functions. It allows the user to choose between schedules or
holidays. Line 1 may read “Zone Manager” or Constant
Volume Unit” as application.
The screens will step through the Start Time and then the Stop
Time for each day of the week. You can quit at any point in the
process by pressing the "ESC" key.
All times are in 24-hour format, so 5:00 PM would be entered
as 1700.
If both the Start and Stop Times are ZERO, the schedule is in a
Continuous OFF mode.
If both the Start and Stop Times are 2359, the schedule is in a
Continuous ON mode.
WEEK SCHEDULES
Sunday Start Time
Value Hrs/Mins: 0
(MILITARY FORMAT)
WEEK SCHEDULES
Sunday Stop Time
Value Hrs/Mins: 0
(MILITARY FORMAT)