Zone manager status – Auto-Zone Control Systems Auto-Zone Plus Systems Installation & Operation (Version 03A) User Manual
Page 99
Auto-Zone Plus
Section 3
Programming
3-13
Zone Manager Status
Line 1 Displays the currently selected Zone Manager and its current operating software
version on all Status Screens shown below.
Status Screen #1
Status Screen #2
Manager # 1 vl.xx
Occupied Mode
Vent Mode
Line 2 - Unoccupied Mode
Return Control
Occupied Mode
Push Button Override
Forced Occupied
Forced Unoccupied
Forced Fan Only Mode
Purge Mode
Line 3 - Neutral Mode
Vent Mode
Cooling Mode
Heating Mode
Line 4 - Binary Contact Alarm
Blank Line if no Alarm
Manager # 1 vl.xx
Supply Air: 78.6°F
Return Air: 77.3°F
Outdoor Air: 70.2°F
The Supply Air Temperature, Return Air Temperature and
Outdoor Air Temperature are displayed on this screen.
The Outdoor Air Temperature is either the onboard sensor
reading, or it can be the Global Broadcast value received from
another unit. Only one unit per system needs to have the
Outdoor Air Sensor installed.