H3C Technologies H3C MSR 50 - Manual (Page 197)

Channel
number
Default
channel name
System information received by
default
Default output destination
7 channel7 Not specified Log, trap, and debug information
8 channel8 Not specified Log, trap, and debug information
9 channel9 Log file Log, trap, and debug information
The following matrix shows the feature and router compatibility:
MSR
20-1X
MSR
2600
Feature MSR 900 MSR 930 MSR 20 MSR 30 MSR 50
Yes except
that the
log file
output
destinatio
n is not
supported
on MSR
30-11.
Eight output
destinations and
ten channels
Yes. Yes.
Yes except
the log file
output
destination.
Yes. Yes. Yes.
Default output rules of system information
A default output rule specifies the system information source modules, information type, and severity
levels for an output destination. Table 7 shows the default output rules.
Table 7 Default output rules
Log Trap Debug
Destinat
ion
Source
modules Status Severity Status Severity Status Severity
All
supported
modules
Console Enabled Informational Enabled Debug Enabled Debug
All
supported
modules
Monitor
terminal
Informational Enabled Debug Enabled Debug Enabled
All
supported
modules
Log host Enabled Informational Enabled Debug Disabled Debug
All
supported
modules
Trap
buffer
Disabled Informational Enabled Informational Disabled Debug
All
supported
modules
Log
buffer
Informational Disabled Debug Disabled Debug Enabled
All
supported
modules
SNMP
module
Disabled Debug Enabled Informational Disabled Debug
184