H3C Technologies H3C MSR 50 - Manual (Page 232)

Step Command Remarks
555. Configure the
destination
address and
destination UDP
port number for
the IPv6
NetStream
aggregation data
export.
By default, no destination address or
destination UDP port number is
configured in IPv6 NetStream
aggregation view.
ipv6 netstream export host ip-address
udp-port [ vpn-instance
vpn-instance-name ]
If you expect to export only IPv6
NetStream aggregation data, configure
the destination address in related
aggregation view only.
Optional.
By default, the interface connecting to the
NetStream server is used as the source
interface.
556. Configure the
source interface
for IPv6
NetStream
aggregation data
export.
• Source interfaces in different
aggregation views can be different.
ipv6 netstream export source interface
interface-type interface-number
• If no source interface is configured in
aggregation view, the source
interface configured in system view, if
any, is used.
• H3C recommends you connect the
network management interface to the
NetStream server.
557. Enable the current
IPv6 NetStream
aggregation
configuration.
enable Disabled by default
Configuring attributes of IPv6 NetStream data
export
Configuring IPv6 NetStream export format
The IPv6 NetStream export format exports IPv6 NetStream data in version 9 format, and the data fields
can be expanded to contain more information, including the following:
• Statistics about source AS, destination AS, and peer ASs in version 9 format.
• Statistics about BGP next hop in version 9 format.
To configure the IPv6 NetStream export format:
Step Command Remarks
558. Enter system view. system-view N/A
219