H3C Technologies H3C MSR 50 - Manual (Page 74)

Task Remarks
Configuring the management device:
• Enabling NDP globally and for specific ports Required.
• Configuring NDP parameters Optional.
• Enabling NTDP globally and for specific ports Required.
• Configuring NTDP parameters Optional.
• Manually collecting topology information Optional.
• Enabling the cluster function Required.
• Establishing a cluster Required.
• Enabling management VLAN autonegotiation Required.
• Configuring communication between the management device and the
member devices within a cluster
Optional.
• Configuring cluster management protocol packets Optional.
• Cluster member management Optional.
Configuring the member devices:
• Enabling NDP Required.
• Enabling NTDP Required.
• Manually collecting topology information Optional.
• Enabling the cluster function Required.
• Deleting a member device from a cluster Optional.
Toggling between the CLIs of the management device and a member device Optional.
Adding a candidate device to a cluster Optional.
Configuring advanced cluster functions:
• Configuring topology management Optional.
• Configuring interaction for a cluster Optional.
• Configuring the SNMP configuration synchronization function Optional.
• Configuring Web user accounts in batches Optional.
Configuring the management device
Perform the tasks in this section on the management device.
Enabling NDP globally and for specific ports
For NDP to work correctly, enable NTDP both globally and on specific ports.
To enable NDP globally and for specific ports:
61