Ipv6 netstream configuration task list, Enabling ipv6 netstream, Configuring ipv6 netstream data export – H3C Technologies H3C MSR 50 User Manual
Page 230: Configuring ipv6 netstream traditional data export, Ipv6, Netstream configuration task list, Conf, Iguring ipv6 netstream data export
The version 9 format template-based feature provides support of different stat
and MPLS information.
istics, such as BGP next hop
IPv6
fo
ing configurations are proper, as needed:
•
timer for IPv6 NetStream flow aging.
ata export uses, configure IPv6 NetStream
egation.
C
onfigure IPv6 NetStream:
Task Remarks
NetStream configuration task list
Be re you configure IPv6 NetStream, verify that the follow
•
Make sure which device you want to enable IPv6 NetStream on.
Configure the
•
To reduce the bandwidth that IPv6 NetStream d
aggr
omplete these tasks to c
Required.
Configuring IPv6 NetStream
traditional data export
Configuring IPv6 NetStream data
export
Use either command as required.
Configuring IPv6 NetStream
gregation data export
Configuring attributes of IPv6 NetStream data export
Optional.
Configuring IPv6 NetStream flow aging
Optional.
Enabling IPv6 NetStream
Step Command
Remarks
540.
Enter system view.
system-view
N/A
541.
Enter interface view.
interface interface-type interface-number
N/A
542.
Enable IPv6 NetStream
on the interface.
ipv6 netstream { inbound | outbound }
Disabled by default.
Conf
urce interface out
Configuring IPv6 NetStream traditional data export
iguring IPv6 NetStream data export
To allow the NDE to export collected statistics to the NetStream server, configure the so
of which the data is sent and the destination address to which the data is sent.
Step Command
Remarks
543.
Enter system view.
N/A
system-view
interface interface-type
interface-numb
544.
Enter interface view.
N/A
er
217