H3C Technologies H3C MSR 50 User Manual
Page 237
224
[RouterA-ns6-aggregation-as] ipv6 netstream export host 4.1.1.1 2000
[RouterA-ns6-aggregation-as] quit
# Configure the aggregation mode as protocol-port, and then, in aggregation view, configure the
destination address and the destination UDP port number for the IPv6 NetStream protocol-port
aggregation data export.
[RouterA] ipv6 netstream aggregation protocol-port
[RouterA-ns6-aggregation-protport] enable
[RouterA-ns6-aggregation-protport] ipv6 netstream export host 4.1.1.1 3000
[RouterA-ns6-aggregation-protport] quit
# Configure the aggregation mode as source-prefix, and then, in aggregation view, configure the
destination address and the destination UDP port number for the IPv6 NetStream source-prefix
aggregation data export.
[RouterA] ipv6 netstream aggregation source-prefix
[RouterA-ns6-aggregation-srcpre] enable
[RouterA-ns6-aggregation-srcpre] ipv6 netstream export host 4.1.1.1 4000
[RouterA-ns6-aggregation-srcpre] quit
# Configure the aggregation mode as destination-prefix, and then, in aggregation view, configure the
destination address and the destination UDP port number for the IPv6 NetStream destination-prefix
aggregation data export.
[RouterA] ipv6 netstream aggregation destination-prefix
[RouterA-ns6-aggregation-dstpre] enable
[RouterA-ns6-aggregation-dstpre] ipv6 netstream export host 4.1.1.1 6000
[RouterA-ns6-aggregation-dstpre] quit
# Configure the aggregation mode as prefix, and then, in aggregation view, configure the destination
address and the destination UDP port number for the IPv6 NetStream prefix aggregation data export.
[RouterA] ipv6 netstream aggregation prefix
[RouterA-ns6-aggregation-prefix] enable
[RouterA-ns6-aggregation-prefix] ipv6 netstream export host 4.1.1.1 7000
[RouterA-ns6-aggregation-prefix] quit