H3C Technologies H3C SecPath F1000-E - Manual (Page 140)

129
etherStatsCRCAlignErrors : 0 , etherStatsCollisions : 0
etherStatsDropEvents (insufficient resources): 0
Packets received according to length:
64 : 235 , 65-127 : 67 , 128-255 : 4
256-511: 1 , 512-1023: 0 , 1024-1518: 0
# On the configuration terminal, get the traffic statistics through SNMP. (Details not shown.)
History group configuration example
Network requirements
Configure the RMON history group on the RMON agent in Figure 58 to gather periodical traffic statistics
for GigabitEthernet 0/1 every one minute.
Figure 58 Network diagram
Configuration procedure
# Configure the RMON history group on the RMON agent to gather traffic statistics every one minute for
GigabitEthernet 0/1. Retain up to eight records for the interface in the history statistics table.
<SecPath> system-view
[SecPath] interface GigabitEthernet 0/1
[SecPath-GigabitEthernet0/1] rmon history 1 buckets 8 interval 60 owner user1
# Display the history data collected for GigabitEthernet 0/1.
[SecPath-GigabitEthernet0/1] display rmon history
HistoryControlEntry 2 owned by null is VALID
Samples interface : GigabitEthernet0/1<ifIndex.3>
Sampled values of record 1 :
dropevents : 0 , octets : 834
packets : 8 , broadcast packets : 1
multicast packets : 6 , CRC alignment errors : 0
undersize packets : 0 , oversize packets : 0
fragments : 0 , jabbers : 0
collisions : 0 , utilization : 0
Sampled values of record 2 :
dropevents : 0 , octets : 962
packets : 10 , broadcast packets : 3
multicast packets : 6 , CRC alignment errors : 0
undersize packets : 0 , oversize packets : 0
fragments : 0 , jabbers : 0