H3C Technologies H3C SecPath F1000-E User Manual
Page 221
210
# Check the available space of the Flash. Ensure adequate space for the boot file to be uploaded.
<Sysname> dir
Directory of flash0:/
0 -rw- 25535 Feb 17 2011 14:20:02 system.xml
1 -rw- 1780 Feb 17 2011 14:20:04 startup.cfg
2 -rw- 14617560 Feb 15 2011 15:23:29 f1000a_b98.bin
3 -rw- 14617560 Feb 15 2011 12:30:39 f1000a.bin
4 drw- - Jan 06 2011 14:46:09 domain1
5 -rw- 891 Jan 06 2011 14:46:18 default_ca.cer
6 -rw- 1411 Jan 06 2011 14:46:18 default_local.cer
7 drw- - Jan 06 2011 14:46:07 seclog
1048192 KB total (1018012 KB free)
2.
Configure the PC (FTP client):
# Log in to the FTP server through FTP.
c:\> ftp 1.1.1.1
Connected to 1.1.1.1.
220 FTP service ready.
User(1.1.1.1:(none)): abc
331 Password required for abc.
Password:
230 User logged in.
# Download the configuration file config.cfg from the SecPath to the PC for backup.
ftp> get config.cfg back-config.cfg
# Upload the configuration file newest.bin to the SecPath.
ftp> put newest.bin
ftp> bye
NOTE:
•
You can take the same steps to upgrade configuration file with FTP. When upgrading the configuration
file with FTP, put the new file under the root directory of the storage medium.
•
After you finish transferring the Boot ROM program through FTP, you must execute the bootrom update
command to upgrade the Boot ROM.
3.
Upgrade the SecPath:
# Specify newest.bin as the main boot file to be used at the next startup.
<Sysname> boot-loader file newest.bin main
# Reboot the and the boot file is updated at the system reboot.
<Sysname> reboot
CAUTION:
The boot file used for the next startup must be saved under the root directory of the storage medium. You
can copy or move a file to the root directory of the storage medium. For more information about the
boot-loader command, see "Upgrading software."