Executing the tracert operation at the cli, Prerequisites – H3C Technologies H3C SecPath F1000-E User Manual
Page 19
Advertising
8
Figure 5 Page for executing the tracert operation
2.
Enter the IP address or host name of the destination device in the Trace Route field.
3.
Click Star.
The Summary box displays the tracert operation result.
Figure 6 Tracert operation result
Executing the tracert operation at the CLI
Prerequisites
•
Enable sending of ICMP timeout packets on the intermediate devices (the device between the
source and destination devices). If the intermediate devices are H3C devices, execute the ip
ttl-expires enable command.
Advertising
This manual is related to the following products: