H3C Technologies H3C SecPath F1000-E - Manual (Page 75)

64
Step Command Remarks
1. Enter system view. system-view N/A
2. Enable the information center. info-center enable
Optional.
Enabled by default.
3. Name the channel with a
specified channel number.
info-center channel
channel-number name
channel-name Optional.
See
Table 7 for default channel
names.
4. Configure an output channel
for a monitor terminal.
info-center monitor channel
{ channel-number |
channel-name }
Optional.
By default, system information is
output to the monitor terminal
through channel 1 (known as
monitor).
5. Configure an output rule for
the monitor terminal.
info-center source { module-name |
default } channel { channel-number
| channel-name } [ debug { level
severity | state state } * | log { level
severity | state state } * | trap
{ level severity | state state } * ] *
Optional.
See "
Default output rules of system
information ."
6. Configure the timestamp
format. info-center timestamp { debugging
| log | trap } { boot | date | none }
Optional.
By default, the time stamp format
for log, trap and debugging
information is date.
7. Enable the monitoring of
system information on a
monitor terminal. terminal monitor
Enabled on the console and
disabled on the monitor terminal
by default.
8. Enable the display of system
information on the monitor
terminal.
• Enable the display of
debugging information on a
monitor terminal:
terminal debugging
• Enable the display of log
information on a monitor
terminal:
terminal logging
Enable the display of trap
information on a monitor terminal:
terminal trapping
Optional.
By default, the monitor terminal
only displays log and trap
information.
Outputting system information to a log host
Step Command Remarks
1. Enter system view. system-view N/A
2. Enable the information center. info-center enable
Optional.
Enabled by default.