Adding interfaces to the virtual devices, Adding vlan members to the virtual devices – H3C Technologies H3C SecPath F1000-E User Manual
Page 203
192
Figure 95 Creating VD_B
Adding interfaces to the virtual devices
1.
Select Device Management > Virtual Device > Interface from the navigation tree to enter the page
.
Figure 96 Adding interfaces to VD_A and VD_B
2.
Find GigabitEthernet 0/1 in the Interface Member column and select VD_A from the
corresponding Virtual Device list.
3.
Find GigabitEthernet 0/2 from the Interface Member column and select VD_B from the
corresponding Virtual Device list.
4.
Click Apply.
Adding VLAN members to the virtual devices
1.
Add VLAN members to VD_A:
a.
Select Device Management > Virtual Device > VLAN from the navigation tree to enter the page
shown in
b.
Find VD_A from the Virtual Device column.
c.
Click the corresponding
icon in the Operation column.
d.
Enter VLAN ranges "100-205, 300-310".
e.
Click Apply.