Configuration procedure – H3C Technologies H3C SecPath F1000-E User Manual
Page 226
215
Figure 112 Network diagram
Configuration procedure
1.
Configure the PC (TFTP server):
a.
On the PC, enable the TFTP server. (Details not shown.)
b.
Configure a TFTP working directory. (Details not shown.)
2.
Configure the SecPath (TFTP client):
# Examine the storage medium of the device for insufficiency. If no sufficient free space is available, use
the delete/unreserved file-url command to delete unused files. (Details not shown.)
# Download application file newest.bin from PC.
<Sysname> tftp 1.2.1.1 get newest.bin
# Upload a configuration file config.cfg to the TFTP server.
<Sysname> tftp 1.2.1.1 put config.cfg configback.cfg
# Specify newest.bin as the main boot file to be used at the next startup.
<Sysname> boot-loader file newest.bin main
# Reboot the SecPath and the software is upgraded.
<Sysname> reboot
CAUTION:
The boot file used for the next startup must be saved under the root directory of the storage medium. You
can copy or move a file to the root directory of the storage medium. For more information about the
boot-loader command, see "Upgrading software."