H3C Technologies H3C SecPath F1000-E - Manual (Page 207)

196
Figure 101 Basic configuration page
Table 32 Configuration items
Item Description
Enable host traffic statistics Enable or disable the host traffic statistics function.
Host Aging Time
Aging time of hosts.
If a host accesses a specified network service, the firewall periodically collects
traffic statistics for the host. If no traffic statistics is updated because no packets
pass through the host within the aging time, the firewall stops collecting traffic
statistics for the host.
Log Sending Interval Set the interval for sending logs for a host or service type.
Host traffic statistics configuration example
Network requirements
As shown in Figure 102 , the hosts are connected to the Internet through the SecPath. The SecPath sends
log information to the log host.
Configure host traffic statistics to monitor all the traffic destined to TCP port 80 and 8080 sent or received
by the hosts.
Figure 102 Network diagram
Internet
Log host
10.1.1.10/24
SecPath
Host A
Host C
Host B