H3C Technologies H3C SecPath F1000-E - Manual (Page 57)

46
To restore configuration:
1. Select Device Management > Maintenance from the navigation tree.
2. Click Restore.
Figure 22 Restoring configuration
3. Click the upper or lower Browse button to select the .cfg or .xml configuration file.
4. Click Apply.
Resetting the configuration
This operation restores the system to the factory defaults, delete the running configuration file, and reboot
the device.
To reset the configuration:
1. Select Device Management > Maintenance from the navigation tree, and then click the Initialize
tab to enter the initialize confirmation page.
Figure 23 Resetting the configuration
Click the Restore Factory-Default Settings button to restore the system to factory defaults.