H3C Technologies H3C SecPath F1000-E - Manual (Page 32)

21
Step Command Remarks
2. Set the packet forwarding
mode. ip forwarding { per-flow |
per-packet }
By default, the packet forwarding
mode is per-packet.
The newly configured forwarding
mode takes effect at the next
startup of the device.
Displaying and maintaining IP performance
optimization
Task Command Remarks
Display TCP connection statistics.
display tcp statistics [ | { begin | exclude |
include } regular-expression ]
Available in any view
Display UDP statistics.
display udp statistics [ | { begin | exclude |
include } regular-expression ]
Available in any view
Display statistics of IP packets.
display ip statistics [ | { begin | exclude |
include } regular-expression ]
Available in any view
Display ICMP statistics.
display icmp statistics [ | { begin | exclude |
include } regular-expression ]
Available in any view
Display socket information.
display ip socket [ socktype sock-type ] [ task-id
socket-id ] [ | { begin | exclude | include }
regular-expression ]
Available in any view
Display FIB information.
display fib [ vpn-instance vpn-instance-name ]
[ acl acl-number | ip-prefix ip-prefix-name ] [ |
{ begin | exclude | include } regular-expression ]
Available in any view
Display FIB information matching
the specified destination IP
address.
display fib [ vpn-instance vpn-instance-name ]
ip-address [ mask | mask-length ] [ | { begin |
exclude | include } regular-expression ]
Available in any view
Display the forwarding mode for
packets.
display ip forwarding mode Available in any view
Clear statistics of IP packets. reset ip statistics Available in user view
Clear statistics of TCP
connections.
reset tcp statistics Available in user view
Clear statistics of UDP traffic. reset udp statistics Available in user view