H3C Technologies H3C Intelligent Management Center User Manual
Page 105
Advertising
97
Figure 25 Configure basic information
3.
Add match rule for classifier:
a.
Click Add on the toolbar.
The Classifier Characteristics window appears.
b.
Select Match IPv4 Address from the list of Type, and configure the following parameters:
−
Name—Enter name FTP Server to Admin.
−
State—Select Enabled from the list.
−
Relation—Select =(match).
−
IPv4 Source Address—Enter 192.168.1.2.
−
IPv4 Destination Address—Enter 90.16.50.0/24.
c.
Click OK.
Advertising