H3C Technologies H3C Intelligent Management Center - Manual (Page 84)

76
2. From the navigation tree, select QoS Manager > QoS Device.
The QoS Device page appears.
3. Select devices to which you want to deploy a QoS policy.
4. Click Deploy.
The Deploy Guide page appears.
5. On the Setting Deploy Apply Object tab page, select device interfaces or VLANs to which the QoS
policy is to be deployed.
For information about selecting devices interfaces or VLANs, see "
Common operations ."
6. Click Next to move to the Setting QoS Policy page.
7. Configure the QoS policy to be deployed.
For information about configuring a QoS policy, see "
Adding an MQC deployment task on the
deployment task list ."
8. Click Next to move to the Basic Information page.
9. Configure basic attributes of the deployment task (see " Adding an MQC deployment task on the
deployment task list ").
10. Click Next to move to the Summary page.
11. Verify that basic information and deployment objects are correct, and click Finish.
Adding an MQC deployment task on the Interface Policy Application page
This method allows you to add an MQC deployment task for an interface.
To add an MQC deployment task on the Interface Policy Application page:
1. Click the Service tab.
2. From the navigation tree, select QoS Manager > QoS Device.
The QoS Device page appears.
3. Click the Operation icon for a device, and select QoS Configuration Info from the menu.
The QoS Configuration Info page appears and displays the Interface Policy Application tab by
default.
4. Clear the Display only interfaces with CBQ deployed box.
All interfaces of the device are displayed in the list.
5. Click the Deploy icon in the Operation column for the inbound or outbound direction of the
interface that you want to configure.
The Deploy Guide page appears.
For subsequent steps, see "
Adding an MQC deployment task on the QoS Device page ."
Adding an MQC deployment task on the VLAN Policy Application page
This method allows you to add an MQC deployment task for a VLAN.
Only some switch models support deploying QoS policies to VLANs. This method is not available for
devices that do not support deploying QoS policies to VLANs.
To add an MQC deployment task on the VLAN Policy Application page:
1. Click the Service tab.
2. From the navigation tree, select QoS Manager > QoS Device.
The QoS Device page appears.