H3C Technologies H3C Intelligent Management Center - Manual (Page 122)

114
{
For the policy deployed—Select Overwrite.
{
Predefined Execution Time—Select Immediately.
{
Task Description—Enter a description for the task.
11. Click Finish.
Configure the interface priority of Ten-GigabitEthernet1/0/51 to 3 in the same way. Its task name are
ConfigureDot1p3.
Figure 46 Configure interface priority
Verifying the configuration
Viewing the deployment result
View the deployment result in the Deploy Task page.
1. Click the Service tab.
2. From the navigation tree, select QoS Manager > Deploy Task.
The deployment task list appears.
3. All deployment tasks are successfully deployed.