H3C Technologies H3C Intelligent Management Center - Manual (Page 75)

67
1. Access the Business page.
2. Click the icon or name link of the service.
The details of a service include basic information about the service and a classifier-behavior
association list.
Basic information includes the following parameters:
{
Name—Name of the service.
{
Description—Description of the service.
The CB Pair List presents classifier-behavior associations:
{
Classifier—Classifier that classifies packets.
{
Behavior—Behavior performed on classified packets.
3. In the CB Pair List, click a classifier name to view the details of the classifier. For information about
parameters of the classifier, see "
Table 5 ."
4. Click a behavior name to view the details of the behavior. For information about parameters of the
behavior, see "
Table 6 ."
5. To create a deployment task from this service, click Deploy at the top of the page.
Adding a service
1. Access the Business page.
2. In the upper right part of the page, click Add.
The Add Business page appears.
3. In the Basic Info area, configure the basic information for the common service:
{
Name—Enter a name for the service.
{
Description—Enter a description for the service, for example, service introduction, application
scope, or precautions.
4. In the CB Pair List area, configure classifier-behavior associations for the service:
a. Click Add.
The Select Classifier window appears.
b. Select one or more classifiers in the same directory.
If there are many classifiers in the classifier list, you can filter classifiers by entering query
criteria and clicking Query in the Query Condition area.
c. Click the Config icon for a selected classifier.
The window for selecting match criteria appears.
d. Select match criteria.
To select or deselect all match criteria, click All or None.
For a user-defined ACL match criterion, you can modify the ACL number to a value in the range
of 3000 to 3999.
e. Click OK to return to the Select Classifier window.
f. Repeat steps c through e to select match criteria for more selected classifiers.
g. In the Select Classifier window, click OK.
A behavior named "classifier name_B" automatically appears for each added classifier.